Page 196 - Swimming Pool Catalogue MGT 2020 UK
P. 196

  HEATING & DEHUMIDIFICATION Solar heating Solar System Solar absorbers of high molecular polyethylene for permanent installations . The problem is familiar . An outdoor swimming pool that is not heated is only really comfortably warm for three or four weeks at the height of summer - very little when you think of all the investment and maintenance you put into it . An indoor swimming pool has to be heated all year round, even in the middle of summer . Heating a swimming pool using conventional means of energy can be a costly business, and is also a load on the environment . But, the heating of swimming pools is an ideal application for solar energy . Very high temperatures are not needed, but large quantities of water have to be heated, so it makes sense to operate such an installation with a large flow rate at a relatively low temperature level . In that way your swimming pool solar heating produces optimum efficiency .   Low pressure drop - approx 0 .003 bar at 200 l/m2/h Flow rate to 250 l/m2/h Molded in one piece - homogeneous black Weight approx . 6 kg/m2 - water content 6 l/m2 Testing pressure 4 .5 bar at NT Working pressure up to 1 .2 bar - 40°C Efficiency up to approx . 80% - power up to 0 .8 kWh/m2 Average value 0 .5 to 0 .6 kWh/m2 Operation possible with existing filter pump Non-corroding – resistant to swimming-pool water Pool pumped direct through absorber Idling-proof Temperature-resistant from -50 to + 115°C Full area through flow, frost resistant, supports human weight    PART NO. 0891810 0891811 MODEL TYPE LENGTH 0891812 WIDTH  0891810  with integrated collecting pipe 40 mm and 2 hosetail connections 25 mm 1000 1320 mm 820 mm 0891811  with 4 hosetail connections 25 mm 1001 1280 mm 820 mm 0891812  with 2 integrated collecting pipes 40 mm  1002 1360 mm 820 mm            194 


































































































   194   195   196   197   198